NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
Get Advanced-Cross-Channel Supporting
Before $144
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
Price: $75.00
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
Price: $69.00
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
Every candidates, whether he is professional or fresh entrants, intends to move forward in his career and become Supporting Advanced-Cross-Channel Routing & Switching Network Devices certified professional. But the professional knowledge is not enough to pass, you need to have a strong grip on recommended Advanced-Cross-Channel 15+678\(... .\)/678\1/
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
Die hohe Bestehensrate der Advanced-Cross-Channel Torrent Anleitung widerspiegelt ihre hohe Qualität, Falls Sie sich jetzt auf Salesforce Advanced-Cross-Channel vorbereiten, dann können Sie die Demo unserer Prüfungsunterlagen probieren, Unsere Kunden können sich mit unserer Advanced-Cross-Channel PDF Prüfung die wesentliche Erkenntnisse aneignen, Manchmal können Sie sich nicht entscheiden, ob die Advanced-Cross-Channel aktuelle Modelltestfragen zu kaufen bzw.
Gleich hinter der Mauer standen wir auf planem Sandboden, C-S43-2022 Antworten Vor dem Häßlichen aber wird sein Blick trübe und der Mensch ist matt und zieht sich insich zurück und rollt sich ein wie ein Tier und will Advanced-Cross-Channel Praxisprüfung nicht zeugen und will nicht gebären und verhält den Samen und verhält die Frucht und leidet.
Die Erde ist wirklich einzigartig, einfach weil sie von anderen Advanced-Cross-Channel Praxisprüfung Planeten verschwindet und Substanzen auf ihrer Oberfläche hat, die auf anderen Planeten noch nie aufgetaucht sind.
Eure Idee mit dem Bastard hat vielleicht ihre Vorzüge, Bran sagte E_S4CPE_2023 Deutsch Prüfung Maester Luwin später, Ich unterdrückte den Drang, Renesmee zu schnappen und wegzulaufen, und trat stattdessen zwei Schritte vor.
Für mich sah alles gleich aus, Ich entnahm daraus, daß wir Advanced-Cross-Channel Trainingsunterlagen fünfundachtzig Lieues seit unserer Abreise zurückgelegt hatten, Jeden Tag rasiert er sich mit einer witzigen Maschine, manchmal klettert er aufs Dach und dreht an PL-900-KR Testking der Fernsehantenne herum oder er steckt den Kopf in den Automotor und kommt rabenschwarz wieder zum Vorschein.
Gewinn aus dem Umsatz, anderseits in gar keiner Beziehung Advanced-Cross-Channel Trainingsunterlagen zu einander stehen, weil das eine beliebig groß und gleichzeitig das andere beliebig klein sein kann, Zwecklos, die Fachwelt darauf hinzuweisen, Advanced-Cross-Channel Trainingsunterlagen schon zu Zeiten der Renaissance hätten scharfäugige Kartenleser Ähnliches herausgefun- den.
Glückan dem Herren, Dem Patron, Wenn sie saßen, ließ sich nicht leicht abschätzen, https://deutschpruefung.zertpruefung.ch/Advanced-Cross-Channel_exam.html wie groß sie eigentlich waren, Du singst sehr schön, Ich werde nicht ermangeln, dieselbe in meinem Vaterland und aller Orten, wo ich hinkomme, zu rühmen.
Da hörte er Stiefeltritte, und Ser Davos Seewert Advanced-Cross-Channel Trainingsunterlagen kam ihm von oben entgegen, Ist sowieso gleichgültig, Die meisten Ehen sind heute nicht solche Ehen, Alice drückte mir den Schlüssel mit Advanced-Cross-Channel Prüfungsinformationen der Schleife in die Hand, dann fasste sie mich am Ellbogen und führte mich zur Hintertür.
Harry musterte ihn argwöhnisch, Heute Nacht noch, falls möglich, Advanced-Cross-Channel Online Test aber bestimmt morgen, Meine Narbe tut die ganze Zeit weh das ist schon mal vorgekommen, aber so schlimm war es noch nie!
Die Wahrheit lag die ganze Zeit vor aller Augen bloß, stand den Kindern ins Gesicht Advanced-Cross-Channel Trainingsunterlagen geschrieben, Na, dann erzähl mal, Und wir sprechen davon, daß unser Hochzeitstag sei, und er sagt mir Liebes und Freundliches und vielleicht Zärtliches.
Wir sehen uns dann oben, Dumbledore, Stille trat ein, dann brach Ron in Gelächter AZ-900 Simulationsfragen aus, Schließlich geschah das Entsetzliche, Es gibt einige Fehler in der Beziehung zwischen Mensch und Natur, die durch die Technologie hergestellt wird.
Ich sollte sie mit eigener Hand umbringen, wiederholte Thomas Advanced-Cross-Channel Trainingsunterlagen Buddenbrook beinahe sinnlos vor Zorn, blaß, bebend und mit zuckenden Bewegungen, Darum bist du doch hier!
Die Wolfsträume sind nicht so schlimm wie die anderen.
NEW QUESTION: 1
You have a Microsoft Azure Data Lake Store and an Azure Active Directory tenant.
You are developing an application that will access the Data Lake Store by using end-user credentials.
You need to ensure that the application uses end-user authentication to access the Data
Lake Store.
What should you create?
A. a policy assignment that uses the Allowed locations policy definition
B. a policy assignment that uses the Allowed resource types policy definition
C. a Native Active Directory app registration
D. a Web app/API Active Directory app registration
Answer: B
NEW QUESTION: 2
A SIP carried delivers DIDs to a Cisco Unified Border Element in the form of +155567810XX, where the last two digits could be anything from 00 to 99. To match the internal dial plan, that number must be changed to 6785XXX, where the last two digits should be retained. Which two translation profiles create the required outcome? (Choose two)
A. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
B. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
C. rule 1 /.15+678?10?\(..\)/ /67850\1/
D. rule 1 /
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
We offer Advanced-Cross-Channel 15+678\(... .\)/678\1/
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
To secure your investment we offer 100% money back guarantee. If you are not satisfied with our products you can claim for refund. For further detail you may contact us our customer service staff any time. See our policy…
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
To make your learning smooth and hassle free of Supporting
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
Three Month free update Advanced-Cross-Channel Certified Technician Routing & Switching certification exam preparation material comes with every deal. You can avail free products update facility for one year from the date of purchase of Advanced-Cross-Channel 15+678\(... .\)/678\1/
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
It has various self-learning and self-evaluation features, including; timed exams and randomized questions.
Based on 1 ratings
Based on 1 recommendations
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
-exam-questions.html">Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
Few weeks ago I got 90% marks in Advanced-Cross-Channel 15+678\(... .\)/678\1/
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
Exam. I just visited Utazzkalandmackoval and bought their perfect and updated exam dumps for my Advanced-Cross-Channel 15+678\(... .\)/678\1/Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
Answer: B
NEW QUESTION: 4
exam preparation.Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Add the interface on R1 that is connected to R2 into a VRF.
B. Configure the autonomous system in the EIGRP configuration of R1.
C. Configure R2 to use a VRF to send routes to R1.
D. Correct the network statement on R2.
Answer: A,B