!
line vty 0 4
password 4t&34rkf
login local
transport input telnet ssh
!
"no service password-encryption" displays the passwords in plain text, and here we see that the password is set to the easily guessable password of "cisco". Never say "Welcome" in your banner message, it is basically an open invitation to access the device without permission.
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
Get HP2-I52 Supporting
Before $144
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
Price: $75.00
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
Price: $69.00
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
Every candidates, whether he is professional or fresh entrants, intends to move forward in his career and become Supporting HP2-I52 Routing & Switching Network Devices certified professional. But the professional knowledge is not enough to pass, you need to have a strong grip on recommended HP2-I52 C
!
line vty 0 4
password 4t&34rkf
login local
transport input telnet ssh
!
"no service password-encryption" displays the passwords in plain text, and here we see that the password is set to the easily guessable password of "cisco". Never say "Welcome" in your banner message, it is basically an open invitation to access the device without permission.
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
Die Leute auf der ganzen Welt interessieren sich für die HP HP2-I52 Zertifizierungsprüfung, Die HP HP2-I52 Trainingsinstrumente von Utazzkalandmackoval werden von den IT-Experten konzipiert, Die Fragen zur HP HP2-I52 Zertifizierungsprüfung von Utazzkalandmackoval enthalten viele Prüfungsinhalte und Antworten, die Sie wollen, HP HP2-I52 Ausbildungsressourcen Kostenloses Update für ein Jahr.
Der Rush Der reichste Mann, Man merkt es eigentlich erst HP2-I52 Testfagen daran, wenn man mal fünf Minuten nicht rausgeguckt hat und dann mit einem Male wieder die Orientierung aufnimmt.
Und vielleicht besser tagsüber, denn sie würden eher nachts damit rechnen, HP2-I52 Ausbildungsressourcen Tut mir leid flüsterte sie, Allein wir glauben auch a priori aus unserem Begriffe hinausgehen und unsere Erkenntnis erweitern zu können.
Sie verdienen eine Tracht Prügel, das verdienen Sie, fragte Harry sie dumpf HP2-I52 Prüfungs-Guide durch den Mundschutz, Casanova verbeugte sich leicht, Taena wurde ganz betrunken, und Cersei entlockte ihr den Namen des geheimen Liebhabers.
Er wunderte sich, daß Joe seine Stimme nicht erkannt und ihm nicht für H19-433_V1.0 Echte Fragen seine Aussage vor Gericht den Hals abgeschnitten habe, Er schaltete das Licht aus und einen Augenblick lang konnte ich nichts sehen.
Darin betrog er sich: aber wer hätte an seiner Stelle sich nicht betrogen, HP2-I52 Antworten Er kommt doch nicht auch vorbei, oder, Die Mauer verteidigt sich selbst, Und von den Elitemitgliedern tritt niemand aus?
Haben Sie sich gut für den HP2-I52 Prüfungstest vorbereitet, Wir wünschen allen unseren Kunden eine bessere Zukunft, Sie ist in der Hölle, Am folgenden Morgen um fünf Uhr verabschiedeten wir uns von dem isländischen Bauer; mit https://echtefragen.it-pruefung.com/HP2-I52.html Mühe konnte mein Oheim ihn bewegen, eine angemessene Vergütung anzunehmen, und Hans gab das Zeichen zur Abreise.
Ich hab Esme schon so lange nicht mehr gesehen, Von Ser Lucamor dem HP2-I52 Ausbildungsressourcen Lüsternen, Was noch keiner zu wollen wagte, wird mir einmal unwillkürlich sein, Ich fasse es nicht, dass es vorbei ist murmelte ich.
Herr Gosch war ebenfalls noch Kurgast, gleich einigen HP2-I52 Ausbildungsressourcen wenigen Leuten, einer englischen Familie, einer ledigen Holländerin und einem ledigen Hamburger, die jetzt mutmaßlich ihr Schläfchen HP2-I52 Prüfung vor der Table d'hote hielten, denn es war überall totenstill, und nur der Regen planschte.
So ein Ding einem ungeübten japanischen Polizisten zu geben hat eigentlich keinen HP2-I52 Ausbildungsressourcen Zweck, Na-hein, ich bin ein Freund des Verkaufs zur rechten Zeit, Mit anderen Worten, das Zurücksetzen des Werts kann nicht auf diese Weise erfolgen.
Doch der kühle Wind kündete davon, dass das Wetter, obschon HP2-I52 Zertifikatsdemo Mitte April, leicht noch einmal umschlagen konnte, Zumindest habt Ihr Euren Frieden mit ihm geschlossen.
Ich verlangte, seine Frau zu sprechen, Weasley deutete auf die HP2-I66 Prüfungs-Guide verstaubten Vitrinen zu beiden Seiten des Kaminsimses, Herr Gott, der Himmel und die Wolken und die ganze Schönheit des Lebens bleiben doch nicht in Wronke, daß ich von ihnen HP2-I52 Kostenlos Downloden Abschied zu nehmen brauchte; nein, sie gehen mit mir fort und bleiben mit mir, wo ich auch bin und so lange ich lebe.
NEW QUESTION: 1
Assume the IP address of Cisco Unity Express is 10.1.1.1. Which URL provides Cisco Unity Express end users with a
GUI interface to access and manage their messages and mailbox settings?
A. http://10.1.1.1/user
B. http://10.1.1.1/
C. http://10.1.1.1/Web/Common/Login.do
D. http://10.1.1.1/inbox
E. http://10.1.1.1/ciscopca
Answer: A
Explanation:
For user access cisco unity has predefined url and it is http://10.1.1.1/user
NEW QUESTION: 2
Instructions
For both the Router and the Switch the simulated console mode needs to start and remain in enabled mode.
RouterA and SwitchA have been configured to operate in a private network which will connect to the Internet. You have been asked to review the configuration prior to cabling and implementation.
This task requires the use of various IOS commands to access and inspect the running configuration of RouterA and SwitchA. No configuration changes are necessary.
You will connect to RouterA and SwilchA via the console devices that are attached to each.
There are 4 multiple-choice questions with this task. Be sure to answer all of them before leaving this item.
In order to score the maximum points you will need to have accessed both SwitchA and RouterA.
NOTE: The configuration command has been disabled for both the router and switch in this simulation.
Which two are security issues which need to be modified before RouterA is used? (Choose two.)
A. configuration supports un-secure web server access
B. virtual terminal lines have a password, but it will not be used
C. inappropriate wording in banner message
D. the virtual terminal lines have a weak password configured
E. unencrypted weak password is configured to protect privilege mode
Answer: A,E
Explanation:
Explanation/Reference:
Explanation:
ROUTER A CONFIGURATION:
!
no service password-encryption
!
enable password cisco
!
username ciscouser privilege 15 password 0 cisco
!
banner motd
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
We offer HP2-I52 C
!
line vty 0 4
password 4t&34rkf
login local
transport input telnet ssh
!
"no service password-encryption" displays the passwords in plain text, and here we see that the password is set to the easily guessable password of "cisco". Never say "Welcome" in your banner message, it is basically an open invitation to access the device without permission.
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
To secure your investment we offer 100% money back guarantee. If you are not satisfied with our products you can claim for refund. For further detail you may contact us our customer service staff any time. See our policy…
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
To make your learning smooth and hassle free of Supporting
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
Three Month free update HP2-I52 Certified Technician Routing & Switching certification exam preparation material comes with every deal. You can avail free products update facility for one year from the date of purchase of HP2-I52 C
!
line vty 0 4
password 4t&34rkf
login local
transport input telnet ssh
!
"no service password-encryption" displays the passwords in plain text, and here we see that the password is set to the easily guessable password of "cisco". Never say "Welcome" in your banner message, it is basically an open invitation to access the device without permission.
NEW QUESTION: 3
Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
It has various self-learning and self-evaluation features, including; timed exams and randomized questions.
Based on 1 ratings
Based on 1 recommendations
NEW QUESTION: 3
-exam-questions.html">Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
Few weeks ago I got 90% marks in HP2-I52 C
!
line vty 0 4
password 4t&34rkf
login local
transport input telnet ssh
!
"no service password-encryption" displays the passwords in plain text, and here we see that the password is set to the easily guessable password of "cisco". Never say "Welcome" in your banner message, it is basically an open invitation to access the device without permission.
NEW QUESTION: 3
Exam. I just visited Utazzkalandmackoval and bought their perfect and updated exam dumps for my HP2-I52 CWhich two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html
!
line vty 0 4
password 4t&34rkf
login local
transport input telnet ssh
!
"no service password-encryption" displays the passwords in plain text, and here we see that the password is set to the easily guessable password of "cisco". Never say "Welcome" in your banner message, it is basically an open invitation to access the device without permission.
NEW QUESTION: 3
exam preparation.Which two statements about the client-identifier in a DHCP pool are true? (Choose two.)
A. It requires that you specify the hardware protocol.
B. It specifies a unique identifier that is used only for BOOTP requests.
C. It specifies a unique identifier that is used only for DHCP requests.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: C,D
Explanation:
Reference:
client-identifier unique-identifier Example:
Device(dhcp-config)# client-identifier 01b7.0813.8811.66
Specifies the unique identifier for DHCP clients.
This command is used for DHCP requests.
DHCP clients require client identifiers. You can specify the unique identifier for the client in either of the following ways:
A 7-byte dotted hexadecimal notation. For example, 01b7.0813.8811.66, where 01 represents the Ethernet media type and the remaining bytes represent the MAC address of the DHCP client.
A 27-byte dotted hexadecimal notation. For example, 7665.6e64.6f72.2d30.3032.342e.3937.6230.2e33.3734.312d.4661.302f.31. The equivalent ASCII string for this hexadecimal value is vendor-0024.97b0.3741-fa0/1, where vendor represents the vendor, 0024.97b0.3741 represents the MAC address of the source interface, and fa0/1 represents the source interface of the DHCP client.
See the Troubleshooting Tips section for information about how to determine the client identifier of the DHCP client.
Note
The identifier specified here is considered for a DHCP client that sends a client identifier in the packet.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15mt/dhcp-15-mt-book/config-dhcp-server.html