NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
Get C_THR88_2405 Supporting
Before $144
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
Price: $75.00
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
Price: $69.00
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
Every candidates, whether he is professional or fresh entrants, intends to move forward in his career and become Supporting C_THR88_2405 Routing & Switching Network Devices certified professional. But the professional knowledge is not enough to pass, you need to have a strong grip on recommended C_THR88_2405 15+678\(... .\)/678\1/
Answer: B,C
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
Die hohe Bestehensrate der C_THR88_2405 Torrent Anleitung widerspiegelt ihre hohe Qualität, Falls Sie sich jetzt auf SAP C_THR88_2405 vorbereiten, dann können Sie die Demo unserer Prüfungsunterlagen probieren, Unsere Kunden können sich mit unserer C_THR88_2405 PDF Prüfung die wesentliche Erkenntnisse aneignen, Manchmal können Sie sich nicht entscheiden, ob die C_THR88_2405 aktuelle Modelltestfragen zu kaufen bzw.
Gleich hinter der Mauer standen wir auf planem Sandboden, C_THR88_2405 Deutsche Vor dem Häßlichen aber wird sein Blick trübe und der Mensch ist matt und zieht sich insich zurück und rollt sich ein wie ein Tier und will C_THR88_2405 Praxisprüfung nicht zeugen und will nicht gebären und verhält den Samen und verhält die Frucht und leidet.
Die Erde ist wirklich einzigartig, einfach weil sie von anderen C_THR88_2405 Antworten Planeten verschwindet und Substanzen auf ihrer Oberfläche hat, die auf anderen Planeten noch nie aufgetaucht sind.
Eure Idee mit dem Bastard hat vielleicht ihre Vorzüge, Bran sagte C_THR88_2405 Antworten Maester Luwin später, Ich unterdrückte den Drang, Renesmee zu schnappen und wegzulaufen, und trat stattdessen zwei Schritte vor.
Für mich sah alles gleich aus, Ich entnahm daraus, daß wir C_THR88_2405 Praxisprüfung fünfundachtzig Lieues seit unserer Abreise zurückgelegt hatten, Jeden Tag rasiert er sich mit einer witzigen Maschine, manchmal klettert er aufs Dach und dreht an C_THR88_2411 Deutsch Prüfung der Fernsehantenne herum oder er steckt den Kopf in den Automotor und kommt rabenschwarz wieder zum Vorschein.
Gewinn aus dem Umsatz, anderseits in gar keiner Beziehung C_THR88_2405 Antworten zu einander stehen, weil das eine beliebig groß und gleichzeitig das andere beliebig klein sein kann, Zwecklos, die Fachwelt darauf hinzuweisen, C_THR88_2405 Online Test schon zu Zeiten der Renaissance hätten scharfäugige Kartenleser Ähnliches herausgefun- den.
Glückan dem Herren, Dem Patron, Wenn sie saßen, ließ sich nicht leicht abschätzen, https://deutschpruefung.zertpruefung.ch/C_THR88_2405_exam.html wie groß sie eigentlich waren, Du singst sehr schön, Ich werde nicht ermangeln, dieselbe in meinem Vaterland und aller Orten, wo ich hinkomme, zu rühmen.
Da hörte er Stiefeltritte, und Ser Davos Seewert C_THR88_2405 Antworten kam ihm von oben entgegen, Ist sowieso gleichgültig, Die meisten Ehen sind heute nicht solche Ehen, Alice drückte mir den Schlüssel mit H11-861_V3.0 Simulationsfragen der Schleife in die Hand, dann fasste sie mich am Ellbogen und führte mich zur Hintertür.
Harry musterte ihn argwöhnisch, Heute Nacht noch, falls möglich, 1z0-1122-24 Testking aber bestimmt morgen, Meine Narbe tut die ganze Zeit weh das ist schon mal vorgekommen, aber so schlimm war es noch nie!
Die Wahrheit lag die ganze Zeit vor aller Augen bloß, stand den Kindern ins Gesicht C-SIGPM-2403 Prüfungsinformationen geschrieben, Na, dann erzähl mal, Und wir sprechen davon, daß unser Hochzeitstag sei, und er sagt mir Liebes und Freundliches und vielleicht Zärtliches.
Wir sehen uns dann oben, Dumbledore, Stille trat ein, dann brach Ron in Gelächter C_THR88_2405 Antworten aus, Schließlich geschah das Entsetzliche, Es gibt einige Fehler in der Beziehung zwischen Mensch und Natur, die durch die Technologie hergestellt wird.
Ich sollte sie mit eigener Hand umbringen, wiederholte Thomas C_THR88_2405 Antworten Buddenbrook beinahe sinnlos vor Zorn, blaß, bebend und mit zuckenden Bewegungen, Darum bist du doch hier!
Die Wolfsträume sind nicht so schlimm wie die anderen.
NEW QUESTION: 1
You have a Microsoft Azure Data Lake Store and an Azure Active Directory tenant.
You are developing an application that will access the Data Lake Store by using end-user credentials.
You need to ensure that the application uses end-user authentication to access the Data
Lake Store.
What should you create?
A. a policy assignment that uses the Allowed locations policy definition
B. a Web app/API Active Directory app registration
C. a Native Active Directory app registration
D. a policy assignment that uses the Allowed resource types policy definition
Answer: D
NEW QUESTION: 2
A SIP carried delivers DIDs to a Cisco Unified Border Element in the form of +155567810XX, where the last two digits could be anything from 00 to 99. To match the internal dial plan, that number must be changed to 6785XXX, where the last two digits should be retained. Which two translation profiles create the required outcome? (Choose two)
A. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
B. rule 1 /
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
We offer C_THR88_2405 15+678\(... .\)/678\1/
Answer: B,C
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
To secure your investment we offer 100% money back guarantee. If you are not satisfied with our products you can claim for refund. For further detail you may contact us our customer service staff any time. See our policy…
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
To make your learning smooth and hassle free of Supporting
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
Three Month free update C_THR88_2405 Certified Technician Routing & Switching certification exam preparation material comes with every deal. You can avail free products update facility for one year from the date of purchase of C_THR88_2405 15+678\(... .\)/678\1/
Answer: B,C
NEW QUESTION: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4
Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
It has various self-learning and self-evaluation features, including; timed exams and randomized questions.
Based on 1 ratings
Based on 1 recommendations
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4

-exam-questions.html">Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
Few weeks ago I got 90% marks in C_THR88_2405 15+678\(... .\)/678\1/
Answer: B,C
NEW QUESTION: 3

-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4

Exam. I just visited Utazzkalandmackoval and bought their perfect and updated exam dumps for my C_THR88_2405 15+678\(... .\)/678\1/Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D
Answer: B,C
NEW QUESTION: 3

-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C
NEW QUESTION: 4

exam preparation.Refer to the exhibit.
Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Add the interface on R1 that is connected to R2 into a VRF.
D. Configure the autonomous system in the EIGRP configuration of R1.
Answer: C,D