D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

Exam Questions \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

Practice Questions \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

Dumps Questions \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

Dumps PDF"> D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

practice questions and RSTECH \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

exam dumps to help you pass the CCT Routing & Switching real exam. Get 100% Guaranteed success with Utazzkalandmackoval \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

PDF & practice exam software. TRY FREE DEMO"> Get Authentic ISO-IEC-27001-Lead-Auditor CCT Routing & Switching \+ 1555\(678\)10\(..\)$/ /\150\2/<br/><strong>D.</strong> rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/<br/><strong>E.</strong> rule 1 /555\(.*\).*\(.*\)/ /\150\2/<br/><strong>Answer: B,C</strong><br/><br/></p><p><strong>NEW QUESTION: 3</strong><br/>-- Exhibit -<br/><img src="397dadbdbb0afefa681359873ce33c94.jpg" /><br/>-- Exhibit --<br/>Click the Exhibit button.<br/>In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.<br/>Which configuration will accomplish goal?<br/><strong>A.</strong> [edit protocols]<br/>user@R1# show<br/>ospf {<br/>area 0.0.0.0 {<br/>area-range 200.1.1.0/28;<br/>interface ge-0/0/1.0;<br/>interface ge-0/0/2.0;<br/>interface lo0.0;<br/>}<br/>area 0.0.0.1 {<br/>nssa {<br/>default-lsa type-7;<br/>}<br/>interface ge-0/0/3.0;<br/>}<br/>}<br/><strong>B.</strong> [edit protocols]<br/>user@R1# show<br/>ospf {<br/>area 0.0.0.0 {<br/>interface ge-0/0/1.0;<br/>interface ge-0/0/2.0;<br/>interface lo0.0;<br/>}<br/>area 0.0.0.1 {<br/>nssa {<br/>default-lsa type-7;<br/>area-range 200.1.1.0/28;<br/>}<br/>interface ge-0/0/3.0;<br/>}<br/>}<br/><strong>C.</strong> [edit protocols]<br/>user@R1# show<br/>ospf {<br/>area 0.0.0.0 {<br/>interface ge-0/0/1.0;<br/>interface ge-0/0/2.0;<br/>interface lo0.0;<br/>}<br/>area 0.0.0.1 {<br/>nssa {<br/>default-lsa type-7;<br/>area-range 200.1.1.0/29;<br/>}<br/>interface ge-0/0/3.0;<br/>}<br/>}<br/><strong>D.</strong> [edit protocols]<br/>user@R1# show<br/>ospf {<br/>area 0.0.0.0 {<br/>area-range 200.1.1.0/29;<br/>interface ge-0/0/1.0;<br/>interface ge-0/0/2.0;<br/>interface lo0.0;<br/>}<br/>area 0.0.0.1 {<br/>nssa {<br/>default-lsa type-7;<br/>}<br/>interface ge-0/0/3.0;<br/>}<br/>}<br/><strong>Answer: C</strong><br/><br/></p><p><strong>NEW QUESTION: 4</strong><br/>Refer to the exhibit.<br/><img src="490c9393440029fad0dadf5caef637fb.jpg" /><br/>Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)<br/><strong>A.</strong> Correct the network statement on R2.<br/><strong>B.</strong> Configure R2 to use a VRF to send routes to R1.<br/><strong>C.</strong> Configure the autonomous system in the EIGRP configuration of R1.<br/><strong>D.</strong> Add the interface on R1 that is connected to R2 into a VRF.<br/><strong>Answer: C,D</strong><br/><br/></p><script type="application/ld+json"> { "@context": "http://schema.org", "@type": "BreadcrumbList", "itemListElement": [{ "@type": "ListItem", "position": 1, "name": "Utazzkalandmackoval", "item": "/" },{ "@type": "ListItem", "position": 2, "name": "PECB", "item": "https://utazzkalandmackoval.hu/shop-pecb" },{ "@type": "ListItem", "position": 3, "name": "Certification ISO-IEC-27001-Lead-Auditor Exam Cost", "item": "https://utazzkalandmackoval.hu/shop-ISO-IEC-27001-Lead-Auditor_Certification--Exam-Cost-727373/" }] } </script> <script type="application/ld+json"> { "@context": "http://schema.org", "@type": "Product", "aggregateRating": { "@type": "AggregateRating", "ratingValue": "4.9", "reviewCount": "1694" }, "name": "Certification ISO-IEC-27001-Lead-Auditor Exam Cost", "mpn":"ISOIEC27001LeadAuditor", "sku":"ISO-IEC-27001-Lead-Auditor", "description": "2024 Certification ISO-IEC-27001-Lead-Auditor Exam Cost & ISO-IEC-27001-Lead-Auditor Dump Check - PECB Certified ISO/IEC 27001 Lead Auditor exam Online Test", "releaseDate":"Jun 03, 2024", "offers": { "@type": "Offer", "availability": "http://schema.org/InStock", "price": "39", "priceCurrency": "USD", "priceValidUntil": "2025-05-01", "url": "https://utazzkalandmackoval.hu/shop-ISO-IEC-27001-Lead-Auditor_Certification--Exam-Cost-727373/" }, "brand": { "@type": "Organization", "name": "Utazzkalandmackoval" }, "review": [{ "@type": "Review", "author": {"@type": "Person", "name": "Guest"}, "datePublished": "2024-06-03", "description": "PECB Certification ISO-IEC-27001-Lead-Auditor Exam Cost", "reviewRating": { "@type": "Rating", "bestRating": "5", "ratingValue": "5", "worstRating": "0" } }] } </script> Exam Questions
\+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

Practice Exam (Desktop Software)

  • 60 Total Questions

Price: $75.00

\+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

Questions & Answers (PDF)

  • 60 Total Questions

Price: $69.00

\+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

Exam Web-Based Self-Assessment Practice Test Software



  • 60 Total Questions
Supported Browsers:
Supported Platforms:
$65.00 $100.00
Customize Your Order

Validate your Credentials against ISO-IEC-27001-Lead-Auditor \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

Exam: An Ultimate Key to Success!

Every candidates, whether he is professional or fresh entrants, intends to move forward in his career and become Supporting ISO-IEC-27001-Lead-Auditor Routing & Switching Network Devices certified professional. But the professional knowledge is not enough to pass, you need to have a strong grip on recommended ISO-IEC-27001-Lead-Auditor \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

course outline of ISO-IEC-27001-Lead-Auditor Certified Technician Routing & Switching exam. Thousands of candidates plan to appear in \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

exam but they skip the plan due to the unavailability of exam preparation material. But you need not to be worried about the \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

exam preparation
now, since you have landed at the right site. Our Supporting (\+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

) exam questions are now available in two easy formats, PDF and Practice exam. All the exam dumps are duly designed by the ISO-IEC-27001-Lead-Auditor professional experts after an in-depth analysis of ISO-IEC-27001-Lead-Auditor recommended material for ISO-IEC-27001-Lead-Auditor Certified Technician Routing & Switching (\+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

) exam. Utazzkalandmackoval is most reliable platform for your ultimate success, we are offering services for last 10 years and have gathered almost 70,000+ satisfied customer around the world.

Besides, once you purchase PECB Certified ISO/IEC 27001 Lead Auditor exam test questions from our website, you will be allowed to free update your ISO 27001 ISO-IEC-27001-Lead-Auditor valid torrent one-year, PECB ISO-IEC-27001-Lead-Auditor Certification Exam Cost We promise we will never share your personal information to any other third parts without your permission, PECB ISO-IEC-27001-Lead-Auditor Certification Exam Cost Time is like sponge so that it will come out when it is squeezed, PECB ISO-IEC-27001-Lead-Auditor Certification Exam Cost Do you still remember that once upon a time you even had the ambition to conquer the universe?

Features were added in successive versions to allow it to Certification ISO-IEC-27001-Lead-Auditor Exam Cost work in a disconnected fashion, It also displays slide notes, We assure you high passing rate for ISO 27001.

Click the Save button to create your new project, C-THR86-2305 Hot Questions You can use context clues within the sentence to determine the meaning of a word, Unfortunately, the library is so big that a lot of programmers https://surepass.actualtests4sure.com/ISO-IEC-27001-Lead-Auditor-practice-quiz.html never have or take) the time to look beyond the modules they have to use, like `os` and `sys`.

Management by these three factors alone will lead Certification ISO-IEC-27001-Lead-Auditor Exam Cost to dead zones" far more often than any other single factor, There is no foolproof recipe for investment success, but there are strategies Certification ISO-IEC-27001-Lead-Auditor Exam Cost that can decrease the risk you might expect, without compromising potential returns.

The survey was conducted online by Harris Interactive from Nov, To that Certification ISO-IEC-27001-Lead-Auditor Exam Cost end, read ahead to the The Security Conscious" section later in this chapter, where we examine just how safe your data is in the cloud.

ISO-IEC-27001-Lead-Auditor Quiz Practice Materials - ISO-IEC-27001-Lead-Auditor Quiz Torrent & ISO-IEC-27001-Lead-Auditor Test Bootcamp

They explain how to wrangle your data into a form where it can be easily used, analyzed, and visualized so others can see the patterns you've uncovered, How to become professional (with PECB ISO-IEC-27001-Lead-Auditor quiz materials)?

However, some people ask if the concept and premise of the best Certification ISO-IEC-27001-Lead-Auditor Exam Cost being" can be used for reasonable consideration of the world, but the rationality depends on the purpose of this idea.

The light can be great, but if nothing else is going MB-240 Online Test on, it's only that, Using the Input Mask Wizard, How soon after purchase will my file be available, Besides, once you purchase PECB Certified ISO/IEC 27001 Lead Auditor exam test questions from our website, you will be allowed to free update your ISO 27001 ISO-IEC-27001-Lead-Auditor valid torrent one-year.

We promise we will never share your personal information to 4A0-205 Dump Check any other third parts without your permission, Time is like sponge so that it will come out when it is squeezed.

Do you still remember that once upon a time you New FCP_ZCS_AD-7.4 Practice Questions even had the ambition to conquer the universe, We are famous by our high-quality products and high passing-rate, So there's absolutely no need for you to worry about the accuracy and passing rate of our ISO-IEC-27001-Lead-Auditor exam prep dumps.

Quiz Useful PECB - ISO-IEC-27001-Lead-Auditor - PECB Certified ISO/IEC 27001 Lead Auditor exam Certification Exam Cost

We guarantee that if you have unfortunately failed after using our latest version of ISO-IEC-27001-Lead-Auditor exam guide then don't hesitate to ask for refund, If client uses the PDF version of ISO-IEC-27001-Lead-Auditor exam questions, they can download the demos freely.

Only excellent learning materials such as our ISO-IEC-27001-Lead-Auditor study tool can meet the needs of the majority of candidates, and now you should make the most decision is to choose our ISO-IEC-27001-Lead-Auditor exam questions.

For those who are struggling for promotion or better job, they should figure out what kind of ISO-IEC-27001-Lead-Auditor test guide is most suitable for them, ISO-IEC-27001-Lead-Auditor study guide is also high quality, and it will help you to pass the exam successfully.

You can download our complete high-quality PECB ISO-IEC-27001-Lead-Auditor learning materials as soon as possible if you like any time, Most of their time is spent on work and family.

We are selling virtual products, and the order of our ISO-IEC-27001-Lead-Auditor exam materials will be immediately automatically sent to each purchaser's mailbox according to our system.

At last, you will not regret your choice, You can download ISO-IEC-27001-Lead-Auditor dumps free before purchasing.

NEW QUESTION: 1
You have a Microsoft Azure Data Lake Store and an Azure Active Directory tenant.
You are developing an application that will access the Data Lake Store by using end-user credentials.
You need to ensure that the application uses end-user authentication to access the Data
Lake Store.
What should you create?
A. a policy assignment that uses the Allowed locations policy definition
B. a Web app/API Active Directory app registration
C. a policy assignment that uses the Allowed resource types policy definition
D. a Native Active Directory app registration
Answer: C

NEW QUESTION: 2
A SIP carried delivers DIDs to a Cisco Unified Border Element in the form of +155567810XX, where the last two digits could be anything from 00 to 99. To match the internal dial plan, that number must be changed to 6785XXX, where the last two digits should be retained. Which two translation profiles create the required outcome? (Choose two)
A. rule 1 /

HOT EXAMS
Related Posts
15+678\(... .\)/678\1/
B. rule 1 /.15+678?10?\(..\)/ /67850\1/
C. rule 1 /
 

Why Utazzkalandmackoval ISO-IEC-27001-Lead-Auditor \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

exam preparation materials are the best?

1
PDF forms exam questions & Practice Exam Software

We offer ISO-IEC-27001-Lead-Auditor \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

exam preparation materials in two easy formats, like PDF & Practice Exam Software. The Supporting ISO-IEC-27001-Lead-Auditor Routing & Switching Network Devices PDF format is printable & you can carry all potential questions. The software format come with a user friendly interface you can explore all ISO-IEC-27001-Lead-Auditor \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

exam questions in just few clicks.

2
100% Passing guarantee of ISO-IEC-27001-Lead-Auditor \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

To secure your investment we offer 100% money back guarantee. If you are not satisfied with our products you can claim for refund. For further detail you may contact us our customer service staff any time. See our policy…

3
Non-stop customer support availability of ISO-IEC-27001-Lead-Auditor \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

Exam

To make your learning smooth and hassle free of Supporting

exam, Utazzkalandmackoval offers round the clock customer support services. If you face any problem in ISO-IEC-27001-Lead-Auditor \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

exam preparation material or have any question in your mind so please feel free to contact us our efficient & responsive staff any time.

4
Three Month free update of \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

Questions

Three Month free update ISO-IEC-27001-Lead-Auditor Certified Technician Routing & Switching certification exam preparation material comes with every deal. You can avail free products update facility for one year from the date of purchase of ISO-IEC-27001-Lead-Auditor \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

exam.

SATISFIED CUSTOMERS

It has various self-learning and self-evaluation features, including; timed exams and randomized questions.

4%96%
EffortAmount given
My all4.8
My all0.2
4.8
OUT OF 5

Based on 1 ratings

5
0
4
1
3
0
2
0
1
0
7%93%
EffortAmount given
My all93
My all7
93%
RECOMMEND

Based on 1 recommendations

Quality of Product
4.9
Comfort
4.2
Value of Product
5
Overall Rating
4.2

RR
Ramiro Rosario Sep 22, 2020 flag
-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

-exam-questions.html">

Few weeks ago I got 90% marks in ISO-IEC-27001-Lead-Auditor \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

Exam. I just visited Utazzkalandmackoval and bought their perfect and updated exam dumps for my ISO-IEC-27001-Lead-Auditor \+ 1555\(678\)10\(..\)$/ /\150\2/
D. rule 1 /+ 1555\(...\).\(...\)$/ /\15\2/
E. rule 1 /555\(.*\).*\(.*\)/ /\150\2/
Answer: B,C

NEW QUESTION: 3
-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R5 is receiving five 200.1.1.x routes from the RIP router, and is advertising them into Area 1 using an export policy. You want to summarize the RIP routes into Area 0 with the most specific prefix.
Which configuration will accomplish goal?
A. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/28;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
B. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/28;
}
interface ge-0/0/3.0;
}
}
C. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
area-range 200.1.1.0/29;
}
interface ge-0/0/3.0;
}
}
D. [edit protocols]
user@R1# show
ospf {
area 0.0.0.0 {
area-range 200.1.1.0/29;
interface ge-0/0/1.0;
interface ge-0/0/2.0;
interface lo0.0;
}
area 0.0.0.1 {
nssa {
default-lsa type-7;
}
interface ge-0/0/3.0;
}
}
Answer: C

NEW QUESTION: 4
Refer to the exhibit.

Which two corrective actions could you take if EIGRP routes from R2 fail to reach R1? (Choose two.)
A. Correct the network statement on R2.
B. Configure R2 to use a VRF to send routes to R1.
C. Configure the autonomous system in the EIGRP configuration of R1.
D. Add the interface on R1 that is connected to R2 into a VRF.
Answer: C,D

exam preparation.

Leave Your Comment